Permit Requirements for Mc Daniels, Kentucky
For Plumbing projects in Mc Daniels, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Breckinridge County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General Plumbing Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.
Because Mc Daniels is located within Breckinridge County, the following broader county regulations may also apply to your project:
Kentucky, Breckinridge County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Breckinridge County Plumbing Permit Requirements
In Breckinridge County, Kentucky, plumbing permit requirements are primarily governed by the Kentucky State Plumbing Code and enforced by the state's Department of Housing, Buildings and Construction (DHBC). While there isn't a specific "Building & Safety Division" at the county level for direct permit issuance in unincorporated areas, the county does have designated local inspectors who work in conjunction with the state.
For properties in unincorporated areas of Breckinridge County, plumbing permits are required for all new plumbing installations, including water services and house sewers. Permits are also necessary if any existing fixture, soil, waste opening, or conductor is moved or relocated. Repairs to leaks, cocks, valves, or cleaning of pipes do not require a permit. Homeowners can obtain permits for their own personal residences, but they must perform all the work themselves and file an affidavit stating this. Rental or short-term rental properties are not eligible for homeowner permits.
The Kentucky Building Code, which includes plumbing standards, is a statewide mandatory code. Local governments cannot enforce a different building code for commercial construction. For one- and two-family dwellings, the Kentucky Residential Code applies, and enforcement is at the local level. However, for plumbing, the state DHBC oversees the permitting and inspection process.
Plumbing installation permit fees vary based on the type of installation (residential or commercial) and the number of openings. For residential (one and two-family) permits, there is a base fee plus a per-opening fee. Commercial permits have a higher base fee and a higher per-opening fee. A separate permit is required for domestic water heater installations only.
Breckinridge County does not have its own planning and zoning ordinances for unincorporated areas. The incorporated cities within the county (Cloverport, Hardinsburg, and Irvington) have their own planning and zoning regulations. For questions regarding building permits or codes in the unincorporated areas, you can contact the county building inspector.
- County Building Inspector: Troy Mills, Phone: 270-302-7105
- State Plumbing Inspector for Breckinridge County: John Stamper, Cell Phone: 270-230-5707
- Alternative State Plumbing Inspector: Bob Maeser, Cell Phone: 270-331-9974
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Kentucky:
Kentucky Plumbing Legislation, Codes, and Guidelines
Kentucky Plumbing Statutes and Codes
Plumbing in Kentucky is primarily governed by Kentucky Revised Statutes (KRS) Chapter 318, which establishes the legal framework for the practice of plumbing, licensing requirements, and the authority to promulgate the state plumbing code. The technical standards for plumbing installations, materials, and methods are set forth in the Kentucky State Plumbing Code, which is codified under 815 KAR Chapter 20 of the Kentucky Administrative Regulations.
Unlike some other building codes that may adopt a specific edition of the International Plumbing Code (IPC) by reference, the Kentucky State Plumbing Code is a distinct set of regulations developed and maintained by the state. While it incorporates industry standards, it is specifically promulgated by the state department to address local, climatic, and regulatory conditions within the Commonwealth.
Regulatory Agencies
The primary state agency responsible for the administration, oversight, and enforcement of plumbing standards and licensing in Kentucky is the Department of Housing, Buildings and Construction (DHBC), specifically through its Division of Plumbing. This division is responsible for:
- Issuing and renewing licenses for master and journeyman plumbers.
- Reviewing and issuing plumbing construction permits.
- Conducting inspections to ensure compliance with the Kentucky State Plumbing Code.
- Administering the state plumbing examination through the State Plumbers Examining Committee.
While the DHBC maintains state-level authority, certain local jurisdictions may be authorized to administer and enforce the state plumbing code within their boundaries, provided they adhere to state regulations and employ qualified inspectors.
Resources to Learn More